Fibreglass Pool Sand Filter

Fibreglass pool and koi pond sand filter with 1.5 inch multiport valve, side view

Fibreglass Pool Sand Filter

Price range: R3,617.50 through R5,112.50 Excl. VAT

In stock

Price range: R3,617.50 through R5,112.50 Excl. VAT

A vacuum infused fibreglass sand filter for domestic swimming pools, running 0.7 to 1.4mm silica against a 0.4mm slotted underdrain so fine suspended particles are caught rather than passed back to the pool. Four tank sizes cover pools from 5,000 to 75,000 litres, each controlled by a 1½ inch multiport valve. 4 Weeks lead time.

SKU: N/A Category:
Clear
View cart

Description

Sand filtration is still the workhorse of pool circulation. Water is driven down through a bed of graded silica, the sand holds back the suspended particles, and when the bed loads up a turn of the multiport valve backwashes it clean instead of sending you out for a replacement cartridge.

Choose your size

SizePool volumeSilica mediaMax flowPumpTank dia x height
1 Bag5,000 to 10,000 L40 kg5 m³/h0.25 to 0.4 kW460 x 500 mm
2 Bag10,000 to 30,000 L80 kg8 m³/h0.4 to 0.6 kW580 x 580 mm
3 Bag30,000 to 50,000 L120 kg10 m³/h0.6 to 0.75 kW580 x 620 mm
4 Bag50,000 to 75,000 L160 kg12 m³/h0.75 to 1.1 kW640 x 690 mm

Pick by pool volume first, then check the flow and pump columns against the pump you already have.

Why this filter

● Vacuum infused fibreglass, not roto-moulded plastic. Multi-directional Rovicore fibreglass impregnated with isophthalic polyester resin, a stiffer and more chemically resistant tank than roto-moulded plastic.
● 0.4 mm underdrain slits matched to fine 0.7 to 1.4 mm silica. The bed holds back fine suspended particles instead of passing them back into the pool.
● Backwash, rinse and recirculate from one handle. A 1½ inch multiport valve does the lot, with no repiping.
● Air clears itself. An integrated venturi release means no bleeding the tank by hand after a backwash.
● Quick release lid. Oval 130 x 175 mm pressure seal in reinforced fibreglass with an 8 mm stainless steel bolt, so media changes are not a wrestling match.

Full specifications

Filter mediaSilica sand, 0.7 to 1.4 mm
Underdrain slit width0.4 mm
Tank materialVacuum infused GRP
Control system1½ inch multiport valve
Air releaseIntegrated automatic venturi
Top lidOval 130 x 175 mm, quick release
Pipework and fittingsUPVC and ABS
Internal pipe size50 mm
External pipework50 mm (1 to 3 Bag), 63 mm (4 Bag)
Media bed depth300 / 420 / 460 / 500 mm
Normal operating pressure80 to 150 kPa
Factory test pressure300 kPa

Bag count refers to the mass of silica the tank holds, at 40 kg per bag.

Additional information

WeightN/A
DimensionsN/A
Size

1 Bag (40kg media), 2 Bag (80kg media), 3 Bag (120kg media), 4 Bag (160kg media)