Fibreglass Koi Pond Filter

Fibreglass pool and koi pond sand filter with 1.5 inch multiport valve, side view

Fibreglass Koi Pond Filter

Price range: R3,721.50 through R5,216.50 Excl. VAT

In stock

Price range: R3,721.50 through R5,216.50 Excl. VAT

A vacuum infused fibreglass filter built for koi and ornamental ponds, running coarse 4 to 6mm silica against a 1mm slotted underdrain so heavier pond solids pass into the bed without blinding it. Four tank sizes cover ponds from 5,000 to 75,000 litres, each controlled by a 1½ inch multiport valve. 4 Weeks lead time.

SKU: N/A Category:
Clear
View cart

Description

A koi pond asks something different of a filter than a swimming pool does. The solids load is heavier and more organic, so a bed of fine pool sand blinds quickly and the pressure climbs. This filter runs a coarse silica bed over wider underdrain slits, so it takes on solids and still backwashes clean.

Choose your size

SizePond volumeSilica mediaMax flowPumpTank dia x height
1 Bag5,000 to 10,000 L40 kg5 m³/h0.25 to 0.4 kW460 x 500 mm
2 Bag10,000 to 30,000 L80 kg8 m³/h0.4 to 0.6 kW580 x 580 mm
3 Bag30,000 to 50,000 L120 kg10 m³/h0.6 to 0.75 kW580 x 620 mm
4 Bag50,000 to 75,000 L160 kg12 m³/h0.75 to 1.1 kW640 x 690 mm

Pick by pond volume first, then check the flow and pump columns against the pump you already have.

Why this filter

● 1 mm underdrain slits with coarse 4 to 6 mm silica. The bed takes on a heavy organic solids load instead of blinding over, which is where a fine pool bed gives up.
● Low pressure drop protects your flow rate. Koi stocking density depends on turnover, and a coarse bed keeps the pump working with you rather than against a clogging filter.
● Vacuum infused fibreglass, not roto-moulded plastic. Multi-directional Rovicore fibreglass impregnated with isophthalic polyester resin, a stiffer and more chemically resistant tank than roto-moulded plastic.
● Backwash, rinse and recirculate from one handle. A 1½ inch multiport valve does the lot, with no repiping.
● Air clears itself. An integrated venturi release means no bleeding the tank by hand after a backwash.
● Quick release lid. Oval 130 x 175 mm pressure seal in reinforced fibreglass with an 8 mm stainless steel bolt, so media changes are not a wrestling match.

Full specifications

Filter mediaSilica sand, 4 to 6 mm
Underdrain slit width1 mm
Tank materialVacuum infused GRP
Control system1½ inch multiport valve
Air releaseIntegrated automatic venturi
Top lidOval 130 x 175 mm, quick release
Pipework and fittingsUPVC and ABS
Internal pipe size50 mm
External pipework50 mm (1 to 3 Bag), 63 mm (4 Bag)
Media bed depth300 / 420 / 460 / 500 mm
Normal operating pressure80 to 150 kPa
Factory test pressure300 kPa

Bag count refers to the mass of silica the tank holds, at 40 kg per bag.

Additional information

WeightN/A
DimensionsN/A
Size

1 Bag (40kg media), 2 Bag (80kg media), 3 Bag (120kg media), 4 Bag (160kg media)